Monthly Archives: July 2019

PIM-2 Pulse Metal Detector

The metal detector PIM-2 is a digital version of the analog pulsed MD Delta Pulse developed and commercialized by LugaTek Turkey (LugaTek). PIM-2 differs in that instead of regulators it has a microprocessor, which controls the device, the parameters for which are set in the menu. PIM-2 Pulse schematic PIM-2 Pulse Partlist PIM-2 Pulse PCBs PIM-2 Pulse assembly PIM-2 Pulse …

Read More »

KROT2 Menu Settings

Description of the main operating modes of MD “KROM2-M” Power up krot2 A splash screen appears Then “information” mode (last 3 seconds.) Top line: frequency, current TX. Bottom line: RX voltage and power information. gain Main mode The main mode “Dynamics” Top line: “VDI number”, “response amplitude” S “threshold of detection of ferrous metals” _ “threshold of detection of non-ferrous …

Read More »

KROT2 Partlist Z80

KROT Partlist Z80 for the DIP Version RefDes Type Value X1 1602A C1 C_5X10 0.33* C2 POLCAP_200 470.0 C3 POLCAP_200 100.0 C4 C_2X5-KM 100p C5 C_2X5-KM 33n C6 C_2X5-KM 1.0 C7 C_2X5-KM 1.0 C8 C_2X5-KM 2200p C9 C_2X5-KM 15p C10 C_2X5-KM 15p C11 C_2X5-KM 10.0 C12 CAP300 10n C13 C_2X5-KM 100n C14 POLCAP_200 10.0 C15 C_2X5-KM 33n C16 POLCAP_200 470.0 …

Read More »

KROT2 Partlist Z79

Partlist for Z79 Version of KROT2-XM RefDes Type Value C1 C_5X10 0.33* C2 POLCAP 470.0 C3 POLCAP 100.0 C4 C_0805 100 C5 C_1206 33n C6 C_0805 1.0 C7 C_0805 1.0 C8 C_1206 2200 C9 C_0805 15p C10 C_0805 15p C11 C_1206 10.0 C12 CAP300 10n C13 C_0805 100n C14 POLCAP 10.0 C15 C_0805 33n C16 POLCAP 470.0 C17 C_0805 100n …

Read More »

KROT2 Download files

KROT BCB Version Z79 MD_KROT2_3V7 PCB LAYOY  MD_KROT2_Key_Board _Z79 PCB Partlist  KROT PCB Version Z80 KROT2_Z80_DIP PCB Layout KROT2_Z80_DIP_Panel PCB KROT2_Z-80-SMD PCB Partlist Z80 DIP Version  Partlist Z80 SMD Version  Firmware Files for KROT2 Firmware KROT2_v01A from 03/22/2013 , frequency ~ 8.5kGz  Firmware KROT2_v02    from 03/15/2013  Firmware KROT_v02A from 05/04/2013 Improved version 1A.  Firmware MOLE v02B from 04/14/2013   Improved dir. “Statics”. (R10 ~ …

Read More »

KROT2 PI PCB

The boards are made by Sprint-Layout version 6 format, the link to the download of the working version of this program is posted on the download page. you’ll need to Sprint Layout for opening the *.lay files: The board is designed on the basis of installation in the Z-79 case using remote batteries. If you apply a larger case, the …

Read More »

KROT2 PI Schematic

Diagram  MD Below we provide the  M circuit and PCB All this can be downloaded in one archive, fee in .lay format M circuit board Scheme MD Mole-2M Now keep the Mole-2m circuit and its circuit board. The archive will be 2 types of printed circuit boards for the body of the Z78 and the body of the Z80. Also …

Read More »

Programmers utilities

USBasp Programmer Firmware and circuit The following packages include circuit and firmware. usbasp.2011-05-28.tar.gz (519 kB) . usbasp.2009-02-28.tar.gz (260 kB) usbasp.2007-10-23.tar.gz (172 kB) usbasp.2007-07-23.tar.gz (176 kB) usbasp.2006-12-29.tar.gz (118 kB) usbasp.2006-09-16.tar.gz (116 kB) usbasp.2005-11-14.tar.gz (175 kB) usbasp.2005-07-03.tar.gz (166 kB) usbasp.2005-04-21.tar.gz (169 kB) Please refer to Readme.txt for details on building, installing and using USBasp. Drivers On Linux and MacOS X no kernel …

Read More »

USBTiny-MkII Slim AVR

USBTiny-MkII SLIM programmer (AVRISP-MKII clone) supports all Attiny, Atmega, and Xmega µcontrollers. It has three programming interfaces: ISP, PDI, and TPI. It works with AvrStudio or AvrDude. Small convenient board, contains double direction voltage translator for all interfaces and working from 1,2V, jumper for target chip voltage selection 5V or 3,3V (LDO stabilizer), and status LEDs. The heart of the …

Read More »

Clone PI-AVR Menu

•The MENU includes 6 options. • 1) VOLUME. Here we adjust the volume of the audio signal to levels 0 to 7. • 2) LIGHT •Here we select the backlight (ON -OFF) for night mode. • 3) V MIN BATTERY set the minimum voltage that the device can operate. for a 12 volt battery, set the setting to 10.5 volts. …

Read More »