•The MENU includes 6 options.
• 1) VOLUME.
Here we adjust the volume of the audio signal to levels 0 to 7.
• 2) LIGHT
•Here we select the backlight (ON -OFF) for night mode.
• 3) V MIN BATTERY
set the minimum voltage that the device can operate. for a 12 volt battery, set the setting to 10.5 volts.
• 4) QUARD INTERNAL
select the coil adjustment on the machine.
AUTO = the device automatically adjusts the coil with the head in the air and away from metallic objects, puts the device into operation and when it is finished the setting shows a number for 2 seconds. this number should be as small as possible and below 15 for a good fit.
• LAST = during startup selects the last choke selection and displays the number.
• 2..4..6 … 8 …. 10 ………. In the third option, we choose a number and change the coil adjustment. I have noticed that we have better results if we let the device automatically adjust the coil and after seeing in which number it stopped selecting us after our second 3 digits bigger. if it stops at 8, we can select the 10 through the menu and there works with greater sensitivity.
• 5) GRAND ADJUST
• adjusts the sensitivity of the device according to soil composition. It has the sub-selections.
• ADAPTIVE constantly adjusts and adjusts the machine according to soil and its content
• FIXING = keeps the setting in a medium price
• OF (STATIC) = no adjustment. pressing the RESET switch makes no changes.
• 6) VOLUME RISE.
• we select with how many different tones the depth or the size of the object will show. has subelements 1 for a fixed 1/2 …. 1/4 …. 1/8 …. 1/16 ….. 1/32. suggest option 1/8.
• On the front panel there are 4 keys with dual function depending on whether we are in the menu or not. = Menu / esc … up / + … .down / – … .ok / reset.
• The menu is pressed to enter the menu options and when we want to go out (esc). With the + and – keys, we change the line – we go or we go down. And with ok we validate our choice when we are not in the menu this button makes a reset.
With the up and down keys at any time we can set the barrier . from what signal level and after that, sound will start to sound. From 1 to 16. we select as small as possible.
See also:
- VINTIK-PI V2 metal detector
- simple metal detector with 2 NE555
- Generalities about DIY metal detector
- Tesoro Lobo metal detector
- Pulse PI-AR metal detector based on STM32f1
- Metal detector Qasar AVR microcontroller
- VLF Madera metal detector
- Tesoro Golden Sabre Light “TLSL”
- PI polonese AFRICA V4
- Tesoro Eldorado Metal detector
- Smart Hunter Metal Detector on a Smartphone
- Spirit PI wireless metal detector based Arduino
- Turn your iPhone into a metal detector
- Pulse Metal Detector on Arduino
- Metal detector PI Polonese
- Simple metal detector
- GOLDEN MASK 4 pro
- Coil DD for induction balance metal detectors
- Pinpointer G-NOME
- Pinpointer KB_V3_VCO
- Pinpointer MINIMAX-PP-II
- Pinpointer Based PIC12F675 Microcontroller
- Pinpointer FM-2 v2
- Pinpointer Velleman k7102
- SurfPI Pro metal detector
- FelezJoo Discrimination Fix
- KROT Download files
- Hammerhead PI metal detector
- Tracker PI-2 metal detector
- Terminator 3 metal detector
- Chance PI assembling
- Chance PI download files
- AVR Serial programmer 2
- Chance PI programming
- Chance PI PCBs
- Chance PI schematic
- Chance PI Partlist
- Chance PI metal detector
- Concentric coil for IDX Pro/TGSL
- Pirate PI download page
- VINTIK-PI V1 metal detector
- VINTIK-PI V2 download page
- VINTIK-PI V2 assembly
- VINTIK-PI V2 PCBs
- VINTIK-PI V2 partlist
- VINTIK-PI V2 schematic
- Pirate PI assembly
- Pirate PI Partlist
- Pirate PI PCBs
- Pirate PI Schematic
- Pirate PI metal detector
- IDX Pro Download files
- IDX Pro PCBs
- IDX Pro schematic
- PIM-2 Pulse download files
- PIM-2 Pulse assembly
- PIM-2 Pulse PCBs
- PIM-2 Pulse Partlist
- PIM-2 Pulse schematic
- PIM-2 Pulse Metal Detector
- KROT2 Menu Settings
- KROT2 Partlist Z80
- KROT2 Partlist Z79
- KROT2 Download files
- KROT2 PI PCB
- KROT2 PI Schematic
- Clone PI-AVR Menu
- Clone PI-AVR assembling
- Clone PI-AVR Programming
- Clone PI-AVR PCBs
- Clone PI-AVR Schematic
- Clone PI-AVR Parts List
- Clone PI-W files
- Clone PI-W Buttons function
- Clone PI-W Assembling
- PI-W Partlist
- PI-W PCB
- Batteries and Chargers
- FelezJoo PI Download files
- FelezJoo PI Ground Test
- FelezJoo PI Air Test
- FelezJoo PI Programming
- FelezJoo PI System settings
- FelezJoo PI assembly
- FelezJoo Partlist
- FelezJoo PCB
- FelezJoo Schematic
- IDX Pro PI Metal Detector
- KROT2 PI Metal Detector
- Clone PI-AVR Metal Detector
- Clone PI-W Metal Detector
- FelezJoo PI Metal Detector
- Pulse Induction Metal Detectors
Greetings,
I bought one of these testers from ebay from Ukraine. I adjusted Guard Internal to the third option as described above. let it go though auto detect coil, then select two numbers higher. Now it is stuck in this 3rd Guard Internal selection and I cannot get it to set bact to Auto to search the bigger coil. When I go to the Guard Internal menu now all I can only change the number. I cannot select the other options. How can I reset Ground Internal back to auto? Is there a way to reset the program?